E01 – Water Supply Issue: This code signals a problem with the water inlet, indicating that the dishwasher may not be receiving water properly. Check for blockages or clogs in the water supply, inlet valve, and filter.
E02 – Heating Element Issue: An E02 error indicates that the dishwasher is struggling to heat water as required. This could result from a malfunction in the heating element or thermostat.
E03 – Temperature Sensor Issue: This error code suggests a malfunction in the temperature sensor, responsible for maintaining the correct water temperature throughout the wash cycle. If faulty, consider replacing it.
E04 – Water Level Too High: An E04 error indicates an excessive amount of water in the dishwasher tub. This may result from clogs in the drainage system or issues with the float switch.
E05 – Sprayer Arm Issue: This code relates to problems with the sprayer arm, which may be clogged or not rotating correctly. A malfunctioning sprayer arm can lead to poor cleaning results.
E06 – Detergent Dispenser Issue: An E06 error is associated with problems related to the detergent dispenser, leading to issues with detergent distribution during the wash cycle.
E07 – Circulation Pump Issue: When encountering this code, it indicates an issue with the dishwasher’s circulation pump, responsible for moving water through the dishwasher to clean your dishes.
E08 – Filtration System Issue: An E08 error pertains to problems with the dishwasher’s filtration system. A clogged or dirty filter can lead to inefficient cleaning.
E09 – Faulty Motor: An E09 error signifies a problem with the dishwasher’s motor, a crucial component responsible for various dishwasher functions.
E10 – Inlet Valve Issue: An E10 error points to a problem with the inlet valve, which controls the flow of water into the dishwasher.
E11 – Drain Pump Problem: An E11 error indicates an issue with the drain pump, responsible for removing wastewater from the dishwasher.
E12 – Water Leakage Detected: This code suggests that the dishwasher has detected a water leak. Check for leaks and address them promptly to prevent further damage.
E13 – Water Overflow Issue: An E13 error occurs when there’s an overflow of water in the dishwasher. This could be due to a faulty float switch or other components related to water level regulation.
E14 – Door Lock Error: This code points to problems with the door lock mechanism. Ensure that the door is securely closed and that the latch or hinge is not damaged.
E15 – Water Softener Error: An E15 error indicates an issue with the water softening system. Ensure that the water softener is functioning correctly and that the salt levels are appropriate.
E16 – Drying Fan Issue: This code relates to problems with the dishwasher’s drying fan, which aids in the drying process. Check the fan for any malfunctions.
E17 – Dirty Water Sensor Problem: An E17 error is related to the dirty water sensor, which monitors the cleanliness of the water. Ensure the sensor is clean and functioning properly.
E18 – Inlet Valve Fault: This code signals an issue with the dishwasher’s inlet valve, which controls the water supply. Inspect the valve and related components.
E19 – Turbo Fan Error: An E19 error suggests problems with the turbo fan, which enhances drying performance. Check the fan for obstructions and malfunctions.
E20 – Drainage Pump Blockage: An E20 error is associated with a blocked drainage pump. This can hinder the proper removal of wastewater from the dishwasher.
E21 – Circulation Pump Blocked: This code indicates a blockage in the circulation pump, which affects the dishwasher’s ability to spray water efficiently.
E22 – Low Water Pressure: An E22 error suggests that there is insufficient water pressure, impacting the dishwasher’s ability to function correctly.
E23 – Water Heating Error: This code relates to issues with water heating. The dishwasher may have difficulty reaching the required temperature.
E24 – Flow Sensor Issue: An E24 error indicates problems with the flow sensor, which monitors the water flow into the dishwasher.
E25 – Faulty Spray Valve: An E25 error suggests a malfunction in the spray valve, which controls the water flow to the spray arms.
E26 – Drain Pump Error: This code is associated with issues in the drain pump. A malfunctioning drain pump can hinder the proper removal of wastewater.
E27 – Water Inlet Fault: An E27 error signifies a problem with the dishwasher’s water inlet. The inlet may not be functioning correctly.
E28 – Control Module Error: This code indicates an issue with the dishwasher’s control module, a critical component for its operation.
E29 – Detergent Pump Problem: An E29 error is related to problems with the detergent pump, which distributes detergent during the wash cycle.
E30 – System Error: An E30 error suggests a general system error that may require a comprehensive diagnostic check to identify and address the issue.
Error Codes for Bosch Dryer
E01 – Overheating: The dryer has detected an overheating issue, which can be caused by a blocked vent or a malfunctioning thermostat.
E02 – Drum Not Turning: An E02 error suggests a problem with the motor, drive belt, or pulley system, preventing the drum from turning correctly.
E03 – Moisture Sensor Issue: This code relates to a malfunctioning moisture sensor, affecting the dryer’s ability to detect the level of moisture in the clothes.
E04 – Ventilation Problem: An E04 error indicates a ventilation issue, often caused by a clogged exhaust duct or restricted airflow.
E05 – Door Not Closing: This code suggests a problem with the door. Ensure that the door is securely closed and that the latch or hinge is not damaged.
E06 – Lint Filter Clogged: This error code indicates that the lint filter is blocked or not inserted correctly, impeding proper airflow.
E07 – Duct Blockage: An E07 error is related to a blockage in the exhaust duct. A restricted duct can lead to overheating and poor drying performance.
E08 – Drum Belt Slippage: This error suggests that the drum belt might be slipping, leading to issues with the drum’s rotation.
E09 – Motor Overheating: An E09 error indicates that the motor is overheating, often due to excessive lint buildup around the motor or belt.
E10 – Gas Supply Issue: For gas dryers, E10 signifies a problem with the gas supply, potentially caused by a closed gas valve or low gas pressure.
E11 – Ignition Failure: This code is specific to gas dryers and indicates a failure in the ignition process.
E12 – No Heat: An E12 error suggests that the dryer is not producing heat, often due to a faulty heating element or thermostat.
E13 – Flame Sensor Issue: For gas dryers, an E13 error relates to problems with the flame sensor, affecting the ignition and heating process.
E14 – High Limit Thermostat Issue: This error code indicates an issue with the high limit thermostat, a safety device that shuts off the heating element if the dryer overheats.
E15 – Control Panel Error: An E15 error suggests a problem with the control panel or the electronic controls of the dryer.
E16 – Door Lock Error: This code points to issues with the door lock mechanism. Ensure that the door is securely closed and that the latch or hinge is functioning correctly.
E17 – Internal Memory Error: E17 signifies a memory error within the dryer’s control
